Tài liệu Basic Troubleshooting Process 4 doc

1-4 Semester 8 Internetwork Troubleshooting - Lab 1.2.9.4 Copyright  2001, Cisco Systems, Inc.

Lab 1.2.9.4: Basic Troubleshooting Process 4

WAN Network 2

192.168.0.96 /30

WAN Network 1

192.168.0.100 /30

SanJose1

Objective

Apply the basic troubleshooting model from the last lab to a simple network problem.

To perform this lab read the scenario to make sure that you understand the problem

from the user’s standpoint, follow the lab steps, and apply any basic troubleshooting

skills that you learned in earlier Cisco courses. Remember that for this lab we are

concentrating on the troubleshooting model, not any particular IOS commands.

Scenario

As far as you know the SanJose1 router is functioning fine. There are no user

complaints. You want to get some interface counts from the SanJose1 router.

Step 1

Configure a workstation with the following settings and attach it to the Fast Ethernet

or Ethernet interface on any router:

IP address: 192.168.0.34 (or any valid host in subnet 192.168.0.32 /27)

Subnet mask: 255.255.255.224

Default Gateway: 192.168.0.33

Note: This is the same host configuration from the last lab.

Use the same steps as the last lab to clear and paste the configuration file Lab1-2-9-

4-SanJose1BrokenConfig.txt into any Cisco IOS-based router with at least one

Ethernet / Fast Ethernet interface.