Tài liệu Basic Troubleshooting Process 3 ppt

1-4 Semester 8 Internetwork Troubleshooting v1.0 - Lab 1.2.9.3 Copyright  2001, Cisco Systems, Inc.

Lab 1.2.9.3: Basic Troubleshooting Process 3

WAN Network 2

192.168.0.96 /30

WAN Network 1

192.168.0.100 /30

SanJose1

Objective

Apply the basic troubleshooting model to a simple network problem.

To perform this lab read the scenario to make sure that you understand the

problem from the user’s standpoint, follow the lab steps, and apply any basic

troubleshooting skills that you learned in earlier Cisco courses. Remember that

for this lab we are concentrating on the troubleshooting model, not any

particular IOS commands.

Scenario

As far as you know the SanJose1 router is functioning fine. There are no user

complaints. You are preparing to upgrade the IOS image and will be performing

the upgrade using a TFTP server and controlling it from a console connection.

Note: Since you will not actually perform the upgrade you do not need to have

a TFTP server present to complete the lab.

Step 1

Note: This lab may only function properly on a Cisco 2600 router. The key

command fails on the 2500s that we have tested.

Configure a workstation with the following settings and attach it to the Fast

Ethernet or Ethernet interface on any router (same as last lab):