Tài liệu Heavy-Duty Gas Turbine Operating and Maintenance Considerations docx

GE Power Systems

Heavy-Duty Gas

Turbine Operating and

Maintenance

Considerations

Robert Hoeft, Jamison Janawitz, and Richard Keck

GE Energy Services

Atlanta, GA

GER-3620J

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Maintenance Planning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Gas Turbine Design Maintenance Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Borescope Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Major Factors Influencing Maintenance and Equipment Life. . . . . . . . . . . . . . . . . . . . . . . . . 4

Starts and Hours Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Service Factors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Firing Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Steam/Water Injection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Cyclic Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Hot Gas Path Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Rotor Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Combustion Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Off Frequency Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Air Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Inlet Fogging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Maintenance Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Standby Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Running Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Load vs. Exhaust Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Vibration Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Fuel Flow and Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Exhaust Temperature and Spread Variation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Start-Up Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Coast-Down Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Combustion Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Hot-Gas-Path Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Major Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Parts Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Inspection Intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Manpower Planning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

References. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Heavy-Duty Gas Turbine Operating and Maintenance Considerations

GE Power Systems ■ GER-3620J ■ (01/03) i

GE Power Systems ■ GER-3620J ■ (01/03) ii

Introduction

Maintenance costs and availability are two of

the most important concerns to the equipment

owner. A maintenance program that optimizes

the owner's costs and maximizes equipment

availability must be instituted. For a mainte￾nance program to be effective, owners must

develop a general understanding of the rela￾tionship between their operating plans and pri￾orities for the plant, the skill level of operating

and maintenance personnel, and the manufac￾turer's recommendations regarding the num￾ber and types of inspections, spare parts plan￾ning, and other major factors affecting compo￾nent life and proper operation of the equip￾ment.

In this paper, operating and maintenance prac￾tices will be reviewed, with emphasis placed on

types of inspections plus operating factors that

influence maintenance schedules. A well￾planned maintenance program will result in

maximum equipment availability and optimal

maintenance costs.

Note: The operating and maintenance discus￾sions presented in this paper are generally

applicable to all GE heavy-duty gas turbines; i.e.,

MS3000, 5000, 6000, 7000 and 9000. For pur￾poses of illustration, the MS7001EA was chosen.

Specific questions on a given machine should

be directed to the local GE Energy Services rep￾resentative.

Maintenance Planning

Advance planning for maintenance is a necessi￾ty for utility, industrial and cogeneration plants

in order to minimize downtime. Also the cor￾rect performance of planned maintenance and

inspection provides direct benefits in reduced

forced outages and increased starting reliability,

which in turn reduces unscheduled repair

downtime. The primary factors which affect the

maintenance planning process are shown in

Figure 1 and the owners' operating mode will

determine how each factor is weighted.

Parts unique to the gas turbine requiring the

most careful attention are those associated with

Heavy-Duty Gas Turbine Operating and Maintenance Considerations

GE Power Systems ■ GER-3620J ■ (01/03) 1

Figure 1. Key factors affecting maintenance planning

Manufacturer’s

Recommended

Maintenance

Program

Design

Features

Duty

Cycle

Cost of

Downtime

Type of

Fuel

Replacement

Parts

Availability/

Investment

Reserve

Requirements Environment Utilization

Need

On-Site

Maintenance

Capability

Reliability

Need

Diagnostics &

Expert Systems Maintenance

Planning