Thư viện tri thức trực tuyến
Kho tài liệu với 50,000+ tài liệu học thuật
© 2023 Siêu thị PDF - Kho tài liệu học thuật hàng đầu Việt Nam

Tài liệu CCIE_Train-02(2) ppt
Nội dung xem thử
Mô tả chi tiết
Table of contents
Exercise 1) OSPF across frame relay 2
Exercise 2) NLSP 3
Exercise 3) EIGRP for appletalk 4
Exercise 4) BGP 5
Exercise 5) Access server with remote client 6
Exercise 6) Access server with printer 7
Exercise 7) OSPF across X.25 8
Exercise 8) IPX across X.25 9
Exercise 9) Appletalk across X.25 10
Exercise 10) IP access lists 11
Exercise 11) IPX filtering 12
Exercise 12) Flash upgrade 13
Exercise 13) Multi level user login 14
Exercise 14) Dial Backup 15
Exercise 15) Dial
-on
-demand routing 16
Exercise 16) RSRB and SR/TLB bridging 17
Exercise 17) Integrated routing and bridging 18
Exercise 1) OSPF across frame relay
a) Cable your routers as shown on diagram 1.
b) Configure Melbourne as a 2 port frame relay (FR) switch. Connect Brisbane
and Sydney to the FR switch via their serial 0.
Give Melbourne the following Characteristics :
a. DLCI 100 and 200 on interface serial 0
b. DLCI 101 and 201 on interface serial 1
c. Map DLCI 100 to 101
d. Map DLCI 200 to 201
e. Clock both serial interfaces at 38.4kbps
f. Use Cisco LMI signaling on serial 0
g. Use ANSI LMI signaling on serial 1
Configure Sydney and Brisbane using the following guide lines
h. Use Point-to-point subinterfaces on the FR interfaces
i. One DLCI per subinterface
c) Configure your network for IP routing using the following addressing :
Router Interface Subnet of Number of bits in subnet
-----------------------------------------------------------------------------------------
Brisbane Loopback0 131.108.0.0 7
Brisbane Loopback1 137.112.0.0 8
Brisbane Loopback2 137.112.0.0 8
Brisbane serial 0.X 131.108.0.0 14
Sydney serial0. X 131.108.0.0 14
Sydney Ethernet 0 192.1.1.0 4
Sydney Loopback0 131.108.0.0 7
Canberra Ethernet 0 192.1.1.0 4
Canberra Loopback0 192.1.1.0 4
d) Configure your network for OSPF between Brisbane and Sydney. Adhere to
the following :
a. Network 137.112.0.0 resides in area 1
b. Network 131.108.0.0 resides in the backbone area
e) Configure IGRP between Sydney and Canberra.
f) Redistribute routes between OSPF and IGRP on Sydney.