Automotive, mechnical and electrical engineering

AUTOMOTIVE, MECHANICAL AND ELECTRICAL ENGINEERING

PROCEEDINGS OF THE 2016 INTERNATIONAL CONFERENCE ON AUTOMOTIVE

ENGINEERING, MECHANICAL AND ELECTRICAL ENGINEERING (AEMEE 2016), HONG KONG,

CHINA, 9–11 DECEMBER 2016

Automotive, Mechanical and Electrical

Engineering

Editor

Lin Liu

Wuhan University of Technology, Wuhan, China

CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business

© 2017 Taylor & Francis Group, London, UK

Typeset by V Publishing Solutions Pvt Ltd., Chennai, India

Printed and bound in Great Britain by CPI Group (UK) Ltd, Croydon, CR0 4 YY

All rights reserved. No part of this publication or the information contained herein may be reproduced,

stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,

by photocopying, recording or otherwise, without written prior permission from the publisher.

Although all care is taken to ensure integrity and the quality of this publication and the information

herein, no responsibility is assumed by the publishers nor the author for any damage to the property or

persons as a result of operation or use of this publication and/or the information contained herein.

Published by: CRC Press/Balkema

P.O. Box 11320, 2301 EH Leiden, The Netherlands

e-mail: [email protected]

www.crcpress.com – www.taylorandfrancis.com

ISBN: 978-1-138-62951-6 (Hbk)

ISBN: 978-1-315-21044-5 (eBook)

v

Automotive, Mechanical and Electrical Engineering – Liu (Ed.)

© 2017 Taylor & Francis Group, London, ISBN 978-1-138-62951-6

Table of contents

Preface xiii

Committees xv

Sponsors xvii

Automotive engineering and rail transit engineering

A study of the fuzzy three-parameter shifting rules of the AMT vehicle 3

Q. Chen & Y. Wang

Design process and kinematic characteristics analysis of a minivan’s Macpherson suspension system 9

Y. Wei, Z. Su, C. Liu, F. Xu & H. Chen

Energy conservation of electric vehicles by applying multi-speed transmissions 15

X. Wu, P. Dong, X. Xu, D.A. Kupka & Y. Huang

Finite element analysis and optimisation analysis of thrust rod for mining truck suspension 23

S. Hu, Q. Zhen, M. Ji & G. Shang

Research on crashworthy structure for the straddled-type monorail vehicle 27

X. Zhang

Research on a hybrid electric vehicle regenerative braking system 31

Z. Fang, C. Yang, X. Zhu & L. Zhao

Research on seal performance of rotating articulated skirt and the underwater vehicle 35

H. Gong, Z. Liu & J. Zhou

Research on the improvement of the pedestrians’ overtaking behaviours based

on a social force model in urban rail channel 41

Y. Xing, X. Yin & Y. Liu

Sound quality of vehicle exhaust noise prediction by using support vector regression 49

X. Zhang

A simulation analysis of the exhaust muffler basic unit transmission loss 53

D. Cheng, J. Fan & L. Ji

The Weibull model of the diesel engine based on reliability data distribution fitting 57

Z. Liu, G. Wang, Q. Zhang & X. Li

Mechanical, manufacturing, and process engineering

Analysis of metal structure cracks on the miter gate of the ship lock 65

P. Zhang & J. Zhou

Design and analysis of a wave-piercing buoy 69

D. Jiang, L. Ma, Z. Zhang, H. Dai & H. Chen

Research on tenuous shaft assembly technique based on a three-dimensional pose 75

K. Wei, B. Ren & L. Chai

Research on the meshing characteristic of the gear with the engagement misalignment 79

X. Deng

vi

Simulation of towing operation for tractor-aircraft system 85

J. Bao, Q. Wu & J. Xie

Study of the influence of the process parameters of incremental forming of 6061

aluminium alloy 89

Z. Liu, Z. Shi, T. Guo, Z. Li & C. Cui

Network, communications and applied information technologies

Design of a single-input and dual-input reconfigurable pipelined Analogue

to Digital Converter (ADC) 99

X. Yi, Y. Yin & Z. Xie

A new method of particle filter location based on multi-view fusion 103

Z. Deng, Y. Zhou, J. Jiao & C. Zhai

A review of DNA sequence data analysis technologies and their combination

with data mining methods 109

T. Yu, Y. Chen & B. Zhang

A routing protocol of vehicular heterogeneous network based on the Dijkstra algorithm 115

H. Yu & Z. Bin

Agile C&C decision-making information combination technique based on the theory of evidence 119

H. Sun, J. Quan, H. Huang & Z. Lei

An operational amplifier based non-foster matching network for small loop antenna 123

Y. Ren, J. Tang, J. Sun, J. Zhou & H. Zhang

Analysis of the precision influence factors of SDS-TWR method based on UWB 127

Z. Zhang, S. Li & Z. Lu

Analysis of user influence in Sina Microblog 133

J. Wang, Z. Cao, P. Shi & W. Liu

Cloud evolved packet core network architecture based on Software-Defined

Networking (SDN) 139

Y. Zhang, Z. Xu & Z. Tian

Construction of a military requirement system based on object-relational analytical approach 145

X. Zheng & J. Ren

Data link layer design and verification based on PCIe 2.0 151

Z. Lang, T. Lu & Y. Zong

Design of a new carrier tracking loop in a positioning receiver 157

Z. Deng, S. Jiang, J. Mo & S. Yu

Idealised Six Sigma software design and development 161

H. Yan, R. Tan, H. Song & W. Sun

Message scheduling and network parameter optimisation for FlexRay 167

Y.F. Wang, X.H. Sun, J.B. Xia & J.L. Yin

Micro-satellite attitude determination based on federated Kalman filter using multiple sensors 175

F. Ni, H. Quan & W. Li

Modeling and simulation of meteor burst communication network based on the OPNET 181

H. Gao, X. Zhang, X. Mu, J. Wan & Y. Ren

Performance of wireless communication analysis at high speed 185

X. Li & Y. Liu

Research on the key technologies for developing the internet of things 189

C. Huang & Z. Liu

Research on analysis systems of gas sensors 193

L. Hou, J. Li & H. Gu

vii

Research on clustering algorithms for wireless sensor networks 197

H. Chen & L. Yuan

Research on real-time data centre reconstruction technology based on big data technology 203

X. Li, S. Zhou, S. Ji, G. Zhen, Y. He, W. Li, Y. Wang, W. Tang, J. Chen & P. Lou

Research on a small wireless power transfer device via magnetic coupling resonant 207

X. Liu, R. Dou, Y. Yang, P. Wu, X. Xiao, S. Chen & J. Sun

Simulation and verification technology of shortwave communication based on OPNET 211

X. Zhang, Z. Yi, H. He, J. Wan & Y. Ren

The application of time-frequency analysis method in frequency hopping signal analysis 215

Q. Wu, Z. Tan & H. Shang

Two strategies to improve the performance of two-way relay networks: Relay selection

and power allocation 219

T. Liu, C. Dong & X. Jiang

Updated dynamic channel reservation scheme based on priorities in LEO satellite systems 223

J. Guo, J. Gao & J. Ran

Technologies in energy and power, cells, engines, generators, electric vehicles

A study on coordinated charging strategies for electric vehicles at the workplace

under a uniform electricity price 231

L. Chen, X. Huang & F. Wen

Analysis and study of an energy recycling segment erector hydraulic system 239

J. Liu, X. Zhou & K. Wang

Comprehensive evaluation of microgrid planning schemes based on the Analytic Hierarchy

Process (AHP) method 245

J. He, D. Li, K. Zhou, K. Chen, C. Cao & L. Cheng

Finite element analysis of battery holder based on ANSYS 253

G. Yang & B. Zhao

Integrated control strategy of two operating modes switching based on energy storage 257

T. Yue & X. Yu

Load forecasting of expressway EV charging based on travel characteristics 263

D. Yin, Y. Liu, Z. Chen, T. Zhou & Z. Shi

Machine-team quota measurement of a power transmission project based on GM and BPNN 269

H. Li, L. Zhang, K. Lv & W. Xiao

Man-hour quota measurement of power transmission project based on LSSVM and PSO model 273

K. Lv, F. Xu, Y. Xu & J. Zhang

Non-dissipative equalisation circuit research based on adjacent lithium-ion cell energy transfer 277

R. Wan, M. Chen, J. Wang & F. Yang

On-line electric vehicle charging system under complex environment of transmission lines and

pedestrians with metallic implants 283

F. Wen, X. Huang & L. Chen

Optimisation of oxygen-enriched air intake system of an engine based on pressure

swing adsorption 289

D. Li, Z. Gao & Y. Li

Optimised state of charge estimation in lithium-ion batteries by the modified particle filter method 293

R. Wan, B. Pan, F. Yang, J. Wang & Q. Chen

Research on large power transformer electric field calculation analysis software 299

H. Wang, Y. Li, Y. Jing & B. Zhang

viii

Research on the output-input relationship of Solid Oxide Fuel Cell (SOFC) stack

with indirect internal reforming operation 305

C. Yuan & H. Liu

Simulation of a heat pipe receiver with high-temperature latent heat thermal energy

storage during the charging process 313

H. Song, W. Zhang, Y. Li, Z. Yang & A. Ming

Temperature distribution of wire crimp tubes under different loads 321

H. Zhang, B. Wang, M. Wang, Y. Duan, X. Hu & H. Liu

Optical property research on Mg0.15Zn0.85O film by sol-gel technology 327

J. Zhang

System test and diagnosis, monitoring and identification, video and image processing

A novel remote sensing image segmentation algorithm based on the graph theory 333

Y. Zhou, Y. Han & J. Luo

A subpixel edge detection algorithm for the vision-based localisation of Light Emitting

Diode (LED) chips 339

Y. Qiu & B. Li

Active learning framework for android unknown malware detection 345

H. Zhu

An accelerated testing method based on similarity theory 349

S. Li, Y. Zhang & A. Wang

Analysis of factors influencing laser ranging accuracy 353

Y.G. Ji, C.Y. Tian, X.G. Ge, C.D. Ning & Z.H. Lan

Application of graph databases in the communication and information asset management

in power grid 357

X. Lv, S. Zheng, Z. Li, S. Liu & Y. Wang

Application of support vector regression in surge arrester fault diagnosis 363

Y. He, Y. Sun & H. Jiang

Effect of heave plate on wave piercing buoy 367

D. Jiang, J. Zhang, L. Ma & H. Chen

Height detection in smart baby weighing system using machine vision 371

Q. Fang & H. Tang

Lamb wave metal plate defect detection based on comsol and finite element analysis 375

P. Qin

Lane detection and fitting using the Artificial Fish Swarm Algorithm (AFSA) based

on a parabolic model 381

X. Wang, Z. Wang & L. Zhao

Method for supplementing incomplete traffic flow data in hazy conditions based

on guidance data 389

Y. Gong, J. Zhang, S. Li & J. Lan

Micro-satellite attitude determination based on MEKF using MEMS gyroscope

and magnetometer 395

F. Ni, H. Quan & W. Li

Research and implementation of a vehicle top-view system based on i.MX6Q 401

Y. Xu, X. Zuo, A. Cheng & R. Yuan

Research of the fault detection and repair technology for submarine cable 405

Z. Chen, Z. Lu, X. He & Y. Le

Research on blind identification method of error correcting code type 409

X. Li, M. Zhang & S. Han

ix

Research on the detection system for dynamic ship draft on the basis of ultrasonic

diffraction effect 419

M. Xiong, L. Lu, W. Zheng & R. Li

Research on key technologies of the unmanned-helicopter-born obstacle avoidance radar

for power line inspection 427

C. Li, B. Yang, C. Li, Z. Li & T. Ge

Research on the key technology of automatic target detection for visual vehicles 431

Q. Ren, H. Cheng & J. Chang

Research on machine learning identification based on adaptive algorithm 437

Q. Ren, H. Cheng & J. Chang

Research on main insulation monitoring of submarine cable based on the low frequency

signal of the system 443

Z. Chen, Z. Lu, X. Zheng & W. Peng

Research on object re-identification with compressive sensing in multi-camera systems 447

Y. Huang, Q. Liu & C. Yan

Research on plugging technology in the Yingtai Area of Daqing oilfield 451

Y. Li & Z. Dong

Research on vision technology: Introducing an intelligent destacker based on an ARM-based

laser scanner 455

L. Wang, Y. Peng & H. Li

Review of the image quality assessment methods and their applications to image defogging

and stabilisation 461

J. Cai, W. Yan & J. Liu

Study of a driver’s face and eyes identification method 471

Y. Zhang, H. Zhang, Z. Ding & J. Zhang

Testability modeling for a remote monitoring system of marine diesel engine power plant 475

X. Wen, G. He, K. Bi & P. Zhang

The dynamic target of Yellow River ice tracking algorithm based on wireless video streaming 481

L. Xu & S. Li

The on-line fault diagnosis technique for the radar system based on one-class support vector

machine and fuzzy expert system theory 485

M.S. Shao, X.Z. Zhang & G.H. Fan

Applied and computational mathematics, methods, algorithms and optimization

A highly robust power window anti-pinch algorithm based on approximate integral method 491

H. Fu & J. Liu

A probabilistic aircraft conflict resolution method using stochastic optimal control 497

S. Jia, X. Zhang & X. Guan

A study on wind speed probability distribution models used in wind energy analysis 501

Y.D. Li, Y.T. Sun, K. Li & M. Liu

A tunnel inspection robot localisation algorithm based on a wireless sensor network 507

L. Zhang, R. Huang, L. Zhu, Y. Tao, S. Yao, H. Zheng & B. Tan

Behavior-learning based semi-supervised kernel extreme learning machine for classification 511

H. Yin, J. Yang & Y. Jiang

Big data storage and processing method on the coal mine emergency cloud platform 515

L. Ma, S.G. Li, S.C. Tang & B.F. Yi

Clustering based random over-sampling examples for learning from binary class

imbalanced data sets 519

S. Chen, Z. Huang & X. Guo

x

Comparative study on directional and reverse directional expert systems 525

Z. Lin, H. Huang & P. Wang

Dynamic modelling and simulation of a centrifugal compressor for diesel engines 531

L. Huang, G. Cheng, G. Zhu & S. Fan

Exploration of the operational management of a pig farm based on mathematical modelling 539

N. Ruan & L. Duan

Global large behaviour on a 2-D equation in turbulent fluid 543

H. Li & S. Deng

Glonass almanac parameters algorithm model 549

X. Xie & M. Lu

Local stability of solutions for a class of viscous compressible equations 553

S. Deng & H. Li

Maximum entropy-based sentiment analysis of online product reviews in Chinese 559

H. Wu, J. Li & J. Xie

Node spatial distribution and layout optimization based on the improved particle

swarm algorithm 563

H. Yu, F. Cui & Y. Wang

Optimal load control in direct current distribution networks 569

S. Liu, S. Zou, Z. Ma, Y. Shao & S. Feng

Research on attribute-based encryption scheme for constant-length ciphertexts 575

L. Han, Z. Wang & Y. Wang

Research on attribute-based encryption scheme for constant-length decryption key

in Hadoop cloud environment 581

L. Han, Y. Wang & Y. Sun

Research on Bayesian network structure learning method based on hybrid mountain-climbing

algorithm and genetic algorithm 587

W. Xu, G. Cheng & L. Huang

Research of the evaluation of electric power construction projects based on fuzzy

comprehensive evaluation 591

X. Feng, Y. Sha, X. Wang, M. Li, K. Cao, H. Xu, Z. Sun & Y. Wang

Research on vehicle routing optimisation in the emergency period of natural disaster rescue 597

J. Ma, X. Wang & L. Zhao

Research on the Zigbee routing algorithm based on link availability prediction 601

Z. He

Short-term load forecasting based on fuzzy neural network using ant colony

optimization algorithm 605

Z. Ren, Q. Chen, L. Chen, K. Cao, H. Wang, R. Chen, Y. Tian, Y. Wang & H. Wang

Soft measurement of emulsion matrix viscosity based on GA-BP neural network theory 609

Y. Wang & J. Zhang

Stability control algorithm for unmanned aerial vehicle based on dynamic

feedback search 613

X. Lu & J. Ke

Study of MA and MACD directional expert systems based on funds management 621

F. Yu, H. Huang & P. Wang

Study of RSI and W%R reverse directional expert systems based on funds management 627

H. Huang & P. Wang

Weather routing based on modified genetic algorithm 633

Y. Wang, X. Zhu, X. Li & H. Wang

xi

Technologies in electrical and electronic control and automation

A full on-chip LDO regulator with a novel transient-response-enhanced circuit 639

P. Zhang, P. Wang, H. Meng, S. Zhao & F. Liu

A review on camera ego-motion estimation methods based on optical flow for robotics 645

L. Lu

A work charged car insulation system design and research 651

K. Li, L. Xia, L. Tan & D. Wang

Analysis of static impedance abnormity based on EMMI 655

H. Meng, R. Li, P. Zhang & Y. Chen

Application of an unmanned aerial vehicle in fire rescue 659

B. Hu & J. Xing

Attitude tracking of quadrotor UAV based on extended state observer 663

Y. Liu, X. Xu & Z. Yang

Design of a high performance triple-mode oscillator 669

Z. Li, S. Yue, Y. Mo, J. Wang & F. Chu

Electromagnetic compatibility design of power supply based on DSP industrial control system 675

W. Liu, X. Zheng, Z. Lin & J. Xu

MAC design and verification based on PCIe 2.0 681

Z. Lang, T. Lu & Y. Zong

Miniaturization of microstrip open-loop resonator with fragment-type loading 687

T. Liu, L. Wang & G. Wang

Power electronic digital controller based on real-time operating system 691

L. Guo, S. Tao, L. Pei & W. Gao

Reactive power optimisation with small-signal stability constraints 695

J. Xu, X. Wang, K. Wang & C. Zha

Research and design of beacon laser drive system 701

D. Xiao, H. Li & H. Zhang

Research on a kind of intelligent garbage bin combined with solar street light 705

Y. Feng

Research on dual PWM converter for doubly fed motor generation system 709

J. Xu, L. Huang, L. Zhang, Y. Zhou, L. Yan & H. Li

Research on single event effect based on micro-nano SRAM semiconductor devices 713

S. Wang

Design of an industrial robot system based on PLC control 717

Y. Dai

Industrial production, manufacturing, management and logistics

A method of electric power enterprise project plan audit based on full-text retrieval technology 723

Z. Wang, Y. Chen, H. Zhou, F. Li, Q. Chen, Z. Ren, Y. Wang & H. Kang

Advanced predictive quality adjustment strategy for aircraft parts 727

F. Zhu, X. Huang, N. Wei & B. Ye

Analysis on international fragmentation production of China’s manufacturing industry 733

Y. Yang & Y. Chen

Impact analysis of global production network on China’s industrial chain upgrading 741

Y. Yang & Y. Chen

Logistics demand forecasting model applied in the Wuling mountain area 747

H. Chen & R. Chen

xii

Logistics equipment support capability evaluation 753

G. Zhen

Optimisation and simulation of the production schedule for the missile general assembly process 757

X. Hu, Z. Zhang & Y. Li

Research on bridge construction methods of power outage maintenance in distribution networks 761

L. Xu, J. Niu, D. Zou, L. Tang, L. Liu, W. Li & Y. Fu

Research on logistics network site selection under imperfect information 765

L. Yang, X. Wang & J. Ye

Research on strategic development of smart logistics 771

Z. Fan & M. Ma

Virtual missile assembly system based customisation of plant simulation 775

L. Ma, Z. Zhang, X. Su & K . Guo

Author index 779

xiii

Automotive, Mechanical and Electrical Engineering – Liu (Ed.)

© 2017 Taylor & Francis Group, London, ISBN 978-1-138-62951-6

Preface

The organizing committee of AEMEE 2016 is proud to present the proceedings of the 2016 International

Conference on Automotive Engineering, Mechanical and Electrical Engineering (AEMEE 2016: http://

www.aemee.org/), held in Hong Kong, China during December 09–11, 2016.

AEMEE 2016 was a platform for presenting excellent results and new challenges facing the field of the

automotive engineering, mechanical and electrical engineering. It brought together experts from industry,

governments and academia, experienced in engineering, design and research.

AEMEE 2016 received 356 manuscripts, and 115 authors participated in this conference. By submit￾ting a paper to AEMEE 2016, the authors agreed to the review process and understood that papers would

undergo a peer-review process. Manuscripts were reviewed by appropriately qualified experts in the field

selected by the Conference Committee, who gave detailed comments and-if the submission was accepted￾the authors would submit a revised version that took into account this feedback. All papers were reviewed

using a double-blind review process: authors declared their names and affiliations in the manuscript for

the reviewers to see, but reviewers did not know each other’s identities, nor did the authors receive infor￾mation about who had reviewed their manuscript. The Committees of AEMEE 2016 invested great efforts

in reviewing the papers submitted to the conference and organizing the sessions to enable the participants

to gain maximum benefit.

Hopefully, all participants and other interested readers will benefit scientifically from the proceedings

and also find it stimulating in the process.

With our warmest regards,

Lin Liu

Conference Organizing Chair

Wuhan, China