Applied decisions in area of mechanical engineering and industrial manufacturing

Applied Decisions in

Area of Mechanical

Engineering and

Industrial Manufacturing

Edited by

Kuang-Chao Fan

Applied Decisions in Area of

Mechanical Engineering and

Industrial Manufacturing

Selected, peer reviewed papers from the

3rd International Conference on

Mechanical, Control, and Electronic Information

(ICMCEI 2014),

June 27-29, 2014, Taiwan

Edited by

Kuang-Chao Fan

Copyright  2014 Trans Tech Publications Ltd, Switzerland

All rights reserved. No part of the contents of this publication may be reproduced or

transmitted in any form or by any means without the written permission of the

publisher.

Trans Tech Publications Ltd

Churerstrasse 20

CH-8808 Pfaeffikon SZ

Switzerland

http://www.ttp.net

Volume 577 of

Applied Mechanics and Materials

ISSN print 1660-9336

ISSN cd 1660-9336

ISSN web 1662-7482

Full text available online at http://www.scientific.net

Distributed worldwide by and in the Americas by

Trans Tech Publications Ltd Trans Tech Publications Inc.

Kreuzstrasse 10 PO Box 699, May Street

CH-8635 Durnten-Zurich Enfield, NH 03748

Switzerland USA

Phone: +1 (603) 632-7377

Fax: +41 (44) 922 10 33 Fax: +1 (603) 632-5611

e-mail: [email protected] e-mail: [email protected]

Preface

The 3rd International Conference on Mechanical, Control, and Electronic

Information (ICMCEI 2014) will be held in Chinese Culture University, Taiwan,

during June 27 to June 29, 2014.

This is the third of ICMCEI conference; we aim at providing a platform for

researchers, engineers, academicians as well as industrial professionals from

all over the world to present their research results and development activities

in Mechanical, Control, and Electronic Information.

The present volumes collect accepted papers and represent an interesting

output of this conference. This book covers these topics Materials Science and

Processing; General Mechanical Engineering and Applied Mechanics; Control

Systems and Robotics; Electrical Engineering and Apparatus; Power System

and Energy Engineering; Civil, Construction and Geology Research;

Electronics and Integrated Circuits, Embedded Technology; Analysis, Testing

and Monitoring; Signal, Image Processing and Computational Mathematics;

Communication, Networks and Information Technologies; Traffic and

Transportation; Product Design and Industrial Engineering.

The proceeding records the fully refereed papers presented at the conference.

This conference can only succeed as a team effort, so the editors thank the

international scientific committee and the reviewers for their excellent work in

reviewing the papers as well as their invaluable input and advice.

Prof. Kuang-Chao Fan,

National Taiwan University

Taiwan

Committees

Conference Chairs

Wu-Shiung Feng

Department of Electrical Engineering, Chang Gung University

Program Committee Chairs

Chun-Jung Chen

Department of Computer Science, Chinese Culture University

Technical Program Committees

Kuang-Chao Fan,

National Taiwan University

Yung-Fa Huang

Department of Information and Communication Engineering, Chaoyang University of

Technology

Jeng-Kuang Hwang

Department of Communication Engineering, Yuan Ze University

Shi-Jim Yen

Department of Computer Science and Information Engineering, National Dong Hwa

university

Jung-Lang Yu

Department of Electrical Engineering, Fu Jen Catholic University

Lih-Ren Hwang

Department of Information and Communication Engineering, Chaoyang University of

Technology

Te-ho Wu

National Yunlin University of Science and Technology

Jong-Ching Wu

National Changhua University of Education

Hsiung Chou

National Sun Yat-sen University

Ko-Wei Lin

National Chung Hsing University

Grace Lin

National Taiwan University

Dean Zhao, Jiangsu University

Jiang Han

Hefei University of Technology

Ming-piao Tsai

National Formosa University

Tieli Sun

Northeast Normal University

Shihong Shi

Soochow University

Xiaogang Wu

Harbin University of Science and Technology University Science and Technology

Lee-Min Lee

Department of Electrical Engineering, Dayeh University

Tai-Ning Yang

Department of Computer Science, Chinese Culture University

Sponsors

Chinese Culture University, Taiwan

Table of Contents

Preface, Committees and Sponsors

Chapter 1: Materials Science and Processing

Modeling and Analysis the Effect of Helical Carbon Nanotube Morphology on the

Mechanical Properties of Nanocomposites Using Hexagonal Representative Volume

Element

M.T. Le and S.C. Huang 3

The Catalyzed Synthesis of Prenyl Alcohol

F.X. Ruan, Z.P. He, H.L. Song, K.L. Huang, J. Hu, X.Y. Peng, H.Q. Yu, D.K. Liao, G.S. Sun,

S.Y. Huang and Z.M. Wei 7

Preparation and Effect of Heat Treatment Temperature on the Crystal Phase of Anodic

Aluminum Oxide Films

X.Z. Liu, X.H. Yan, G. Wang, X.Z. Liu, J. Chen and Y.C. Zhu 11

Effect of Preparation Conditions on the Performance of Electrodeposited Mo-Ni Coating

X.Z. Liu, Q.W. Shen, Y.F. Luo, X.Z. Liu, J. Chen and Q.W. Shu 15

The Room Temperature Ferromagnetism of (N, Co) Co-Doped ZnO Nanopaticles

P. Cao, Y. Bai and Z. Qu 19

Stress Corrosion Cracking of Stainless Steel Expansion Joint for Heat-Supply Network

F. Yang, N. Zhang and Y. Song 23

Study on the Effect of Fuel Sulfur Content on Emission Characteristics in Diesel Engine

A.K. Wu, X.D. Yang, H. Zhou and K.J. Lu 27

Research on Emission Performances of Emulsified Diesel Oil with Diethyl Ether

A.K. Wu, X.D. Yang, H. Zhou and K.J. Lu 31

Experimental Study on Frictional Resistance Characteristics of CO2-Emulsified Viscoelastic

Surfactant Fracturing Fluid

Z.F. Jing, S.Z. Wang, X.R. Luo and Z.G. Wang 35

Effect of Electrical Conductivity and Physical Performance about Vulcanization System in

Conductive Silicon Rubber

Y.X. Zhang and B. Li 39

Numerical Simulation of Borehole Heat Transfer with Phase Change Material as Grout

J.L. Wang, J.D. Zhao and N. Liu 44

Characteristic of Porous Carbon Fiber and its Microwave Absorption as Filler for

Composite

Y.W. Li, J. Song, J.L. Wei, Y.B. Zhou and G. Li 48

Preparation and Characterization of Proton Exchange Membrane Based on Sulfonated

Poly(arylene ether sulfone)/Polyacrylonitrile (SPAES/PAN)

H. Wei and G. Li 53

Preparation and Properties of MWCNTs/ PBO Membrane by Electrospinning

R.R. Hao, J.H. Jin and S.L. Yang 58

Study on Microstructure of NiCrMoY Alloy Coatings

C.L. Hu and S.L. Hou 62

Application of Magnetic Control Shape Memory Alloy in Structural Vibration Control

J.S. He, S.L. Wang and G.Y. Weng 66

Co-Gasification Characteristic and Kinetic Analysis of Spent Mushroom Compost and

Bituminous Coal

Z.Q. Wu, S.Z. Wang, J. Zhao, L. Chen and H.Y. Meng 71

Effect of TMCP Parameters on Microstructure and Mechanical Properties of Cargo Oil

Tanks Steel

C. Yu, X.H. Gao, P. Wang, X.X. Niu, C.L. Qiu, L.X. Du and H.W. Wang 77

Helium Bubbles Effect on the Mechanical Properties of CLAM Alloys by Milte-Scale

Simulations

J.W. Zhang, J. Cai, S. Jiang, X. Guo, Q.Z. Sun and Y.D. Wang 81

b Applied Decisions in Area of Mechanical Engineering and Industrial

Manufacturing

Aluminium Alloy Welding the Weld Stress Deformation and Control

Q.G. Meng, Y. Yin and X.J. Guo 86

Maintenance Optimization of the OLED Manufacturing Process

P. Chang and Y.H. Ao 90

Research on Spring-Back Simulation and Die Surface Optimization of Automotive Panel

Stamping Process

H. Song, D.S. Bi, C. Li, X. Guan and G. Yang 94

The Converter Steelmaking End Point Prediction Model Based on RBF Neural Network

X.L. Dong and S. Dong 98

Structural Phase Transition and Electronic Properties of MgCe under High Pressure from

First-Principles Calculations

Q.X. Liu, D.P. Lu, R.J. Zhang, L. Lu and S.F. Xie 102

Study on Machining Mechanism of Glass Using Discrete Element Method

Y. Qiu, M.L. Gu, F.G. Zhang and Z. Wei 108

Population Transfer in Multilevel System via Modified Stimulated Raman Adiabatic

Passage

X.Q. Shu, C. Deng, Y. Kuang, J.H. Yang and Y.D. Liu 112

Chapter 2: General Mechanical Engineering and Applied Mechanics

A Method for Double Random Vibration Analysis

J. Liao, D.F. Xu and B.Y. Jiang 119

Analysis of Dynamic Characteristics on Continuous Tension Leveler

B. Chen, J.Q. Xue, H.H. Lin and Z.J. Yin 125

Analysis of Hydraulic Jarring Dynamics and Calculation of Impact Force

H. Yin, N. Luo and Q. Li 129

Analysis of the Influence of Superelevation of Subway Line Act on Wheel-Rail Wear

S.X. Zhou and R. Xue 135

Analysis of the Thermal Behavior of a Ball Screw Based on Simulation and Experimental

Investigation

Z.H. Li, K.G. Fan and J.G. Yang 140

Application of CAN in Lifting and Sliding Mechanical Parking Garage

P. Sun and J.S. Shi 145

Dynamic Characteristics Analysis of Steam Generator Tube of Nuclear Power Plant by

Finite Elements

S. Jiang, J. Cai, J.W. Zhang, Q.Z. Sun, X. Guo and Y.D. Wang 149

Effects of Defect Shapes on Stress of High-Strength Steel Pipe Using FSI Method

Y. Cui, H.Q. Lan, Z.H. Zhang, N. Lin and Y.P. Du 154

Finite Element Analysis of Gear’s Stress Analysis Based on Accurate Model

L. Wang, H.X. Tang, H. Zhu and S.J. Zhang 158

Finite Element Simulation of Front Suspension Lower Arm of MacPherson Type Based on

ANSYS

L.Z. Li and Z.F. Song 162

Lower Beam of the Heavy Isothermal Forging Hydraulic Press Compare between Rigidity

Test and Simulated Result

W.J. Han, D.S. Bi, S. Li, Y.B. Guan and G. Yang 166

Negative Ten Decibels Method for Damping Identification of Light Damping Structure

Z.W. Guo, M.P. Sheng and J.G. Ma 170

Research on Abrasion Mechanism of Working Roll and Strategies of Anti-Wear in Tension

Leveler

B. Chen, M.C. He and H.H. Lin 174

Study on Adhesion Property in the Process of Vibrating Compaction

J.Q. Li and D. Xie 178

Study on the Damping Characteristic of Semi-Active Torsional Damper Based on

Combined Positive and Negative Stiffness

H. Li, H. Liu and C.L. Xiang 182

Applied Mechanics and Materials Vol. 577 c

Study on the Thermal Characteristics Simulation and Error Compensation of Long Rail of

Heavy Numerically-Controlled Machine Tool

M.Y. Xiao, Z.P. Hua and S.S. Cheng 187

Study on Three-Dimensional Design of Crankshaft Piston Group of Diesel Engine Based on

Pro-E

Y. Shi, Y.F. Liu and X.S. Jia 192

Study on Time-Frequency Spectrum Characteristic of Dynamic Cutting Load Based on

Wavelet Regularization

C.S. Liu, C.P. Ren and F. Han 196

The Analysis of the Effect of Structure to the Fouling Characteristic of Spiral-Grooved

Tube

D. Yu and R. Li 201

The Damping Forced Vibration of Rectangular Stiffened Plates with Elastic Boundary

Edges Including Boundary Damping

A.F. Zhang, M.P. Sheng and H.Y. Xiao 205

The Design and Analysis of Saw-Milling Working Head for Special Shaped Stone

J. Sun, K. Zhang, D.H. Zhao, Y.H. Wu and F. Lu 209

The Dynamic Simulation Study of WN Gear Pair after Coupling Tribology

Y.G. Li and G.Q. Zhang 214

The Finite Element Analysis of Modular Hole of the Lateral Longitudinal Beam in the

Power Protection Cabinets

Y.J. Guo, W. Wang, Q.D. Cui and H. Dou 218

The Influence of Bolt Layout Form to the Dynamic Stiffness of the Column

C. Shen, Z.P. Hua, M.S. Zhang and Z. Zhang 222

Vibration Control System of Precision Dicing Saw Machine Based on Neural Network

Method

Y. Ma and X.F. Bai 228

Virtual Prototype Modeling and Simulation of 8m Hydraulic Support

H.W. Wang and Z.F. Dong 232

Construction of Contact Model of Wheelset Assembly Surface Based on ABAQUS

J. Xiao, K.Q. Zhou, R. Zhou, Z.D. Lu, M.M. Yang and M. Zhou 236

Performance Analysis of Triangular Elbow Servo Press

Y. Qiu, W.M. Li and Z. Wei 240

Simulation and Experimental Research on Species in Direct-Injection Diesel Engine

Y.F. Liu, H.S. Tian, X.S. Jia, P.C. Pei and Y. Lu 244

Simulation of 3-D Unsteady Flows in a Tubular Hydro-Turbine on DES

Z.Y. Ouyang and L.X. Zhang 248

The Basic Research of Internal Combustion Engine Performance in Different Swirl Ratio

X.S. Jia, Y.F. Liu, L. Yi and Y. Shi 253

The Parametric Modeling of Hydraulic Turbine Based on Pro/E Secondary Development

M.S. Zhang, Z.P. Hua, C. Shen and Z. Zhang 258

EFG-FE Couping Method

D.H. Wang, Y.J. Gao, J.P. Wang and D.C. Xia 263

A Study on Force Situation of the Coring Pipe Caused by Filling Lunar Regolith in the

Drilling Process

T.X. Liu, C. Wei, L. Ma and Y. Zhao 267

Simulation and Experimental Study on Static and Dynamic Characteristics of Laterally

Interconnected Air Suspension

H. Jiang, K. Qian, L.Y. Ju and Z. Cui 273

Study on Parameters Matching of Air Suspension with Adjustable Auxiliary Chamber and

Full Vehicle

H. Jiang, K. Qian, Z.H. Lai and L.Y. Ju 277

The Inversion Approach of Power Flow in Load Identification

J.G. Ma, M.P. Sheng and Z.W. Guo 281

The Research on the Design and its Dynamic Characteristics of Shell and Tube Sewage Heat

Exchanger

L. Feng, N. Qin and D.F. Sun 285

Analysis and Comparison of the Models for the Rarefied Gas Effect on Gas Lubrication

S. Zhang and P.Y. Song 289

d Applied Decisions in Area of Mechanical Engineering and Industrial

Manufacturing

Research on Screw Extruder Die Pressure and Speed Relationship

Y.L. Gao, L. Wang and L. Zhou 293

The Calculation and Analysis for the Independent Wheels of Tramcar

H. Ma, J. Zhang and X.J. Zhang 297

Two-Dimensional Crack Growth Simulation under Mixed-Mode Loading

W.T. He, J.X. Liu and D. Xie 301

Optimization Design for Luffing Mechanism of Portal Slewing Crane

Z.H. Luo 305

Structural Optimization Scheme for Horizontal Filtering Tank

P. Yang, Z.D. Qu and M. Li 310

Chapter 3: Mechatronics, Control Systems and Robotics

A Energy Saving Control System of Mining Street LED Light Based on SCM

R. Hou, X.M. Long and M.X. Liu 317

An Immune Fuzzy PI Controller for PWM Rectifiers

Z.L. Shao, M.Q. Shi, Z.F. Han, X.D. Wang and Q.M. Li 321

An LED Green Light for New Plant Growth Cabinet Precise Temperature Control System

X.L. Wu, J.L. Dong, F. Liang, S.G. Cui and L.G. Tian 325

Based on Multi-Estimator Technology to Control Speed of Induction Motor

S.M. Feng, Z.P. Yan and X.M. Wu 329

Control Algorithm Research Based on Heating System of Generalized Predictive PID

B.H. Li, S.Y. Zhang, Y.K. Shen and W.S. Cui 334

Design of Stepper Motor Control System Based on SOPC and LabVIEW

X.W. Duan and H. Sun 338

Development of a Marine Self-Balancing Table with Two-Axis Motion Control System

M.P. Huynh and S.C. Huang 342

Development of Real-Time Platform for Engine Emission Control System

J. Zhang 346

Mobile Robot Path Planning Based on Artificial Potential Field Method

B.F. Zhang, Y.C. Wang and X.L. Zhang 350

Modeling and Simulation of Single Screw Extruder Control System

Y.L. Gao, L. Wang and L. Zhou 354

Research on Electronic Pneumatic Steering and Braking Control Technology for

Autonomous Tracked Vehicles

G.Q. Li and X.Y. Wang 359

Simulation Research of Asynchronous Motor Direct Torque Control System Based on

MATLAB

G.H. Li and Y. Li 364

Study of Hoist Control System Based on Dual Three-Level Inverter

F. Wang, S.Y. Qiao and X.L. Zhang 368

Study on the Effect of Fuzzy PID Air-Fuel Ratio Closed Loop Control of a Natural Gas

Engine

Y. Li, E.Z. Song, Z.H. Zhang, G.F. Zhao and S. Huang 372

The Design of Step Motor Subdivision Drive Controller Based on FPGA

H.Y. Dong and H.M. Guo 378

The Information Fusion Technology of the Attitude Angle Based on the BP Neural Network

F. Lin, S.S. Fan and X.G. Qu 382

The Study of Robot Obstacle Avoidance Based on Fuzzy Control

S.X. Li and Q. Yuan 386

Wind and Electricity Supplementary Actuation Desalination Control System Research

C.X. Ma and Z.P. Sun 390

Design and Analysis of Power Assist Elbow for EVA Spacesuit

M.L. Zhou, W.G. Hou and S.H. Xu 395

Switched Reluctance Drive System Design Based on DSP

X.J. Ding, E.D. Hu, S.G. Hu and T. Zhao 401

Applied Mechanics and Materials Vol. 577 e

A New Powertrain System for Electric Hybrid Vehicles

R.G. Wang, M.J. Zhang and C.L. Shi 408

Research and Improvement of the Step Tracking Technology in the Vehicle On-the-Move

System

X.D. Zhang and Y. Wang 412

Research on Technology of On-Line Detection on Key Part of the Deep Sea Oil Facility

H.T. Zhang, W. Li, X.W. Guo, L. Zhao, Y.K. Zhang and Q. Zhang 417

Research on the 840D NC Machine Tool Production Process Monitoring and Management

L.P. Chu, D.M. Xiao, Z.Y. Chen, C.R. Pian, N. Wu and Q. Zhang 421

Application of Repeater Jamming Technology Aiming at Doppler Fire Control Radar on

Ship-to-Ship Missile Penetration

J.Z. Men, Q. E and H.J. Wang 425

Calibration and Evaluation of Steering Wheel Torque Signal for EPS System

Y.K. Sun, W. Hao, X.J. Duan, C.H. Yuan and J.M. Wang 429

How to Get the Solar Direction from Skylight Polarization for Satellite Autonomous

Navigation

H. Huang, J. Zhou and Y.Y. Liu 434

Hydraulic System Fault Diagnosis Method Based on HPSO AND WP-EE

Z.P. You, X.P. Ye and W.H. Zhang 438

Microgravity Simulator Based on Air Levitation for Astronauts EVA Operation Training

M.L. Zhou, H.C. Hu and S.H. Xu 443

LQR Based Trajectory Tracking Control for Forked AGV

Y. Li, X.N. Wang, S.J. Li and J. Zhu 447

Research on the Visual Self-Stabilization System of the Automated Guided Vehicle (AGV)

J. Wang and Z.Y. Xi 452

Development of Retrieve/Storage Cabinets for Chemical Reagents

H.W. Zhang and J.F. Huang 457

Chapter 4: Electrical Engineering, Apparatus and Power Engineering

A Key Strategy for Controlling the High-Power Photovoltaic Inverter

J.H. Zhou, A.W. Cui and X.W. Zhang 463

An Improved Electromagnetic Band Gap Structure for Overcoming the Simultaneous

Switching Noise

Y. Wang, S.H. Yang, P. Geng and Y.C. Chen 469

Characteristics Analysis and Simulation of Self-Excited Single-Phase Induction Generator

W.Y. Chang 474

Current Mode Maximum and Minimum Circuit

H. Wang, Y.C. Zeng and Z.J. Li 478

Design and Implementation of Digital Charger Based on Buck Converter and MPPT

Technology

S.W. Fan, H. Xue and P. Wang 482

Full Power Experiment Method of Single-Phase PWM Back-to-Back Converter

J.H. Zhou, P. Zeng and X.W. Zhang 488

Photovoltaic Grid-Connected Generation Gnalog Device Gesign

X.F. Bai, S. Qiu and P. Li 494

Research and Application of Energy Saving Technology of Inverter in Light Load

J.Y. Zhou 498

Research on Mitigation of Low Order Harmonics in the Grid-Connected Single-Phase PV

Inverter

L.Y. Yang, W.P. Liu, Y.T. Wang, X.P. Wu and Y. Yang 502

Research on the SVPWM Technology Used in PMSM Speed Regulation System

T. Meng and Y. Wang 506

Application of Back Propagation Neural Network for Partial Discharge Pattern Recognition

W.Y. Chang 511

Partial Discharge Pattern Recognition for Cast Resin Current Transformer Using Fuzzy

Neural Network

W.Y. Chang 515

f Applied Decisions in Area of Mechanical Engineering and Industrial

Manufacturing

Diagnostic Analysis of Boiler Make-Up Water Treatment System in Taishan Power Plant

J.M. Zhao, S. Liu, M.D. Li, B. Yang, Y.T. Chen, S.X. Guo and Z.P. Zhu 519

High-Pressure Direct-Fired Steam-Gas Generator (HDSG) for Heavy Oil Recovery

M.M. Ren, S.Z. Wang, L.L. Qian and Y.H. Li 523

Profile Loss Correlations for Variable Incidences

Z.W. Yuan, J. Zhang and D.S. Zhu 527

Study of DC System of UHV Converter Substation

P. Chen, L. Wu and Z.T. Zhang 531

Study on Electrical Parameter Frequency of the Out-of-Step Oscillation Center

J. Yang, F. Tang, Q.F. Liao and Y.F. Wang 536

The Vibration Characteristics of the Hydropower Plant with a Certain Cross Flow Hydro￾Turbine Generating Units and its Earthquake Response Analysis

Z.Y. Ouyang 541

Low Cost Solar Tracker with High Efficiency in PV Generating System

M. Tang, J. Wang and J.M. Yang 546

Investigation of Signal on Transmission Lines in Power System

H. Li and L. Yuan 551

Key Technologies of AC-DC Integrated Power Source

P. Chen, G.Y. Yu and P.D. Li 556

Application of Lithium Iron Phosphate Battery on Electric Power Engineering

P. Chen, X. Hu and G.Q. Shun 560

Waste Heat Recovery Systems of Shampoo Drain Water from Barbershops

F.T. Sun, C.J. Li, R.X. Wang and D.Y. Li 564

Design and Implementation of the Multifunction Fast Charger for LiFePO4 Battery

W.Y. Chang 568

Research of Low Voltage Distribution Grid’s Reliability

L. Tian, Y. Hong, W.Y. Li and Q.F. Zhang 572

Performance Analysis of Solar Double Effect LiBr/H2O Absorption Chiller in Subtropical

City Based on the Year Round Meteorological Data

Z.Y. Li, X.Y. Ye and J.P. Liu 576

Design of Cooling Water Scheme of Gas Compressing Station in West-to-East Gas Pipeline

H.T. Li, Z.Q. Xu and B.R. Zhu 580

Design and Simulation of a Photovoltaic Emulator System Based on a Full-Bridge Structure

L.Y. Yang, Q.N. Chen and S. Yang 584

Research on VSC-HVDC Based on Modular Multilevel Converter Technique

S.Y. Chen, Y.L. Li, X.B. Hu, L. Zhao and C.X. Chen 588

Side Slip Angle Observation of Steer by Wire System

F. Li and S.F. Geng 594

A Method of Controlled Islanding Strategy Based on Artificial Fish Swarm Algorithm

Y.F. Wang, F. Tang, Q.F. Liao and J. Yang 598

A Modeling Method and Comprehensive Algorithms of High Impedance Fault in EHV

Transmission Lines

C. Chen, C.M. Li, J. Li and W.C. Dong 603

Chapter 5: Electronics and Integrated Circuits, Embedded Technology

A High Linearity 0.7-2.6 GHz Up-Conversion Mixer

C. Zhou, X.N. Fan and Z.J. Hua 611

Design and Simulation of S-Band Low Noise Amplifier Based on ATF-54143

H.P. Wang, S.H. Yang, M.L. Feng and Y.C. Chen 615

Design of a Low Phase Noise VCO for WSN Applications

X.M. Si, X.N. Fan, L. Tang and J. Jiang 620

Design of Hardware of Smart Plant Growth Cabinet

S.G. Cui, S.L. Han, X.L. Wu, F. Liang and L.G. Tian 624

Distributed Circuit Simulation by Using Backward-Traversing Waveform Relaxation

C.J. Chen, T.N. Yang, J.D. Sun and C.L. Tsai 628

Applied Mechanics and Materials Vol. 577 g

Miniaturization Design of the 5.8GHz RFID Antenna Based on Metamaterial

P. Geng, S.H. Yang, Y. Wang and Y.C. Chen 632

Parallel Circuit Simulation by Using Simulation-on-Demand and Iterated Timing Analysis

C.J. Chen, J.D. Sun, T.N. Yang and C.J. Lee 636

Realization of Real-Time Transmission of Spectrum Data Based on the uPP Interface of

OMAPL138

J.F. Wang, D.H. Huang and C.H. Li 640

A Programmable Frequency Divider for Multi-Standard Wireless Receivers

J.F. Wang, X.N. Fan, L. Tang and X.Y. Shi 644

Chapter 6: Measurements, Testing and Monitoring

Computation Model and Influencing Factors Analysis for Dynamic Characteristic of

Underwater Monitoring Platforms

K.D. He, Z.F. Fang, Y. Zhang and W.H. Yang 651

Design of Wireless Cage Culture Monitoring System Based on Remote Programme Update

D.D. Chen, H.P. Pan, M.M. Gu and L. Wang 655

Fights Behavior Detection Based on Space-Time Interest Points

J. Hu, X. Qi and J.F. Chen 659

Method for Non-Destructive Measurement of Leaf Area Based on Binocular Vision

L. Zhao, L.L. Yang, S.G. Cui, X.L. Wu, F. Liang and L.G. Tian 664

Optimization and Improvement of a Measuring Model for Coating Bonding Strength of

Revolution Body

J.Y. Zhang, G. Zhao, H.D. Ding, Y.W. Sun and J.W. Yang 668

Research of Intelligent On-Line Detection Equipment for Arresting Wires

Z. Wang, X.D. Zhu and J.H. Song 673

Research on Path Planning Method for On-Line Measurement of Blisk

L. Zhang, Q. Yuan, Q.Z. Sun, Y. Song and J. Zhao 677

Research on Trajectory Detection System of Submarine Pipeline

S.F. Qi and S.P. Cheng 681

Target Area Detection Based on Piecewise Membership FSVM

Z.H. Li, H.Y. Cao, X.Y. Kou and X. Man 685

The Research of Detection and Control System for Indoor Harmful Gas

H.Q. Wang and P. Wang 689

The Research on Low-Orbit Space Debris Detection Range of Exoatmospheric IR Detector

Y. Ji, T.Q. Zhou and Z.Y. Xu 693

Detection of Wear Condition of Micro Milling Cutters Based on Length Fractal Dimension

Z.Q. Wang, G.Y. Zhang and B. Liu 697

Research on Excitation & Measurement Strategy of Tuber Electrical Resistance

Tomography System

X. Deng, Z. Dong, L. Chen and H. Liu 701

Simulation Study of Tuber Electrical Resistance Tomography System

X. Deng, L. Chen, Z. Dong and H. Liu 705

Polar Ocean Observation Buoys Seal Failure Research Based on ARMA Theory

S.M. Wang, Q. Li and Z. Ren 709

Design of a High Resolution and Dual-Path Optical Water Turbidimeter

X. Fei, J. Yao, W. Li, W.Q. Xue and S.H. Zhang 713

Research of Laser Method for Measuring One Type of Ammunition Assembly Angle

A.G. Xu, Z.B. Jiang, L.X. Jia and Z.H. Ming 717

Finite-Element Analysis of a Measuring Model for FeAlCrBSiNb Coating Bonding Strength

of Revolution Body

J.Y. Zhang, G. Zhao, Y.W. Sun, J.W. Yang and H.B. Yang 722

Detection of Broken Rotor Bars in Squirrel Cage Induction Motor Using Filter and Wavelet

Analysis

H.Y. Zhu, J.T. Hu, L. Gao and H. Huang 726

The Field Experiments for Mixed Vehicle-Carrying Signals Acquisition Based on the

Compact RIO

Y.L. Zhang, X. Wu, N. Pan and X. Wang 735

h Applied Decisions in Area of Mechanical Engineering and Industrial

Manufacturing

Chapter 7: Signal, Image Processing and Computational Mathematics

A Correction Method of Fish-Eye Lens Based on Projective Reconstruction

J.C. Zhu, L. Wan, N. Liu and B.F. Zhang 741

A New Algorithm of Range and DOA Estimation of Near Field Sources Based on FLOS￾ESPRIT

L.G. Wang 745

A Robust Hybrid HLLC-FORCE Scheme for Curing Numerical Shock Instability

L.J. Hu and L. Yuan 749

A Secure Image Watermarking Using Visual Cryptography and Discrete Fractional Fourier

Transform

H.Y. Wang 754

Analysis of Parameter Estimation Using Pei Algorithm of FRFT

B. Deng 758

Analysis on High-Energy Physical Problems in Monte Carlo Simulation

B.G. Sun and X.F. Wang 762

Auto Focusing in Digital Holography to Study Marine Microorganism

C.M. Tang and Y.C. Liu 767

Comparison Research about Wavelet and Moving Smoothing Method Applied in Denoising

X-Ray Diffraction Patterns of Tibetan Medicine

Y. Liu, X.W. Duan, C.X. Hu, H. Sun and J.R. Zhu 771

Content-Aware Image Retargeting Based on Semantic Analysis

H. Cheng, W. Li and P.M. Zhong 777

Design and Development of a 14-Pole HTS Filter with the Reflected Group Delay Method

Y.X. Liu, J.C. Du and L.Y. Ji 782

Design of Lightweight Hash Function Based on Iterate

S.J. Gao, R.Q. Zhang and W. Zhang 786

DSP Transplantation of Motion Object Detection Algorithm Based on TMS320DM642

X.L. Zhang, P. Xie and B.F. Zhang 790

Kalman Filter and Complementary Filter in Attitude Estimation of APM

F. Lin, X.L. Miao and X.G. Qu 794

Matlab-Based Formant Estimation

J.Y. Luo and X.E. Sun 798

Research of Discrete Curvature Estimation Method Based on Local Space Parabola

J.W. Ma, Z.Y. Jia and F.J. Wang 802

The HIS_MSR Algorithm for Foggy Image Enhancement

Z.H. Li, X.Y. Kou, H.Y. Cao and X. Man 806

Sub-Optimum Detector Based on Reverbertion-Whiten in FrFT Field

Z.G. Li 810

Active Control Research of SαS Impulse Noise Based on the Nonlinear Transformation

P. Li, J. Zheng, X.F. Bai and X.N. Song 816

Pseudorandom Generators Based on One-Way Functions

S.J. Gao, T.Q. Song and W. Zhang 820

A Class of Nonlinear Singular Difference Inequality in Engineering

W.S. Wang and Z.Y. Hou 824

Research on General DEA Model Based on the Grey Linear Programming

D.C. Xia, B.T. Li, J.P. Wang and G.P. Shi 828

Chapter 8: Communication, Networks and Information Technologies

230MHz Wireless Communication Network Architecture and Design of Power

Consumption Information Collection System Based on WiMAX

Y. Liu, E.G. Zhu, X. Liu and L.J. Dong 835

A Gossip-Based AOA Distributed Localization Algorithm for Wireless Sensor Networks

W. Cui, S.C. Wu and Y.Z. Wang 841